View EE-SA113_505984.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Photomicrosensor (Actuator)
EE-SA113
Dimensions
Note: All units are in millimeters unless otherwise indicated.
Features
* Model has an actuator. * Low operating force (0.15 N (15 gf)). * Connects to circuits with ease.
Absolute Maximum Ratings (Ta = 25C)
Item Emitter Forward current Pulse forward current Reverse voltage Collector-Emitter voltage Detector Emitter-Collector voltage Collector current Collector dissipation Ambient temperature Operating Storage Symbol IF IFP VR VCEO VECO IC PC Topr Tstg Tsol Rated value 50 mA (see note 1) 1A (see note 2) 4V 30 V 5V 20 mA 100 mW (see note 1) -25C to 70C -40C to 85C 260C (see note 3)
Internal Circuit
K C
Soldering temperature
Unless otherwise specified, the tolerances are as shown below. Dimensions 3 mm max. 3 < mm 6 6 < mm 10 10 < mm 18 18 < mm 30 Tolerance 0.3 0.375 0.45 0.55 0.65
A
E
Terminal No. A K C E
Name Anode Cathode Collector Emitter
Note: 1. Refer to the temperature rating chart if the ambient temperature exceeds 25C. 2. The pulse width is 10 ms maximum with a frequency of 100 Hz. 3. Complete soldering within 10 seconds.
Electrical and Optical Characteristics (Ta = 25C)
Item Emitter Forward voltage Reverse current Peak emission wavelength Detector Light current Dark current Leakage current Collector-Emitter saturated voltage Peak spectral sensitivity wavelength Rising time Falling time IR Symbol VF Value 1.2 V typ., 1.5 V max. 0.01 mA typ., 10 mA max. 940 nm typ. 0.5 mA min. 2 nA typ., 200 nA max. 10 mA max. 0.15 V typ., 0.4 V max. 850 nm typ. ----IF = 30 mA VR = 4 V IF = 20 mA IF = 20 mA, VCE = 5 V at free position (FP) VCE = 10 V, 0 lx IF = 20 mA, VCE = 5 V at operating position (OP) IF = 20 mA, IL = 0.1 mA VCE = 10 V ----Condition
lP
IL ID ILEAK VCE (sat)
lP
tr tf
Mechanical Characteristics
Actuator operation (IF = 20 mA, VCE = 5 V) (see note 1) Operating force (see note 2) Mechanical life expectancy Free position (FP): 11.40.3 mm Operating position (OP): 10.2 mm min. Total travel position (TTP): 9.3 mm max. 0.15 N (15 gf) max. 500,000 operations min. (The actuator traveling from its FP to FP via TTP is regarded as one operation.)
140
EE-SA113 Photomicrosensor (Actuator)
Note: 1. Free position (FP):
Operating position (OP):
The distance between the bottom of the housing to the top of the actuator without any external force imposed on the actuator. The distance between the bottom of the housing to the top of the actuator when the actuator is pressed and the IL becomes ILEAK or less.
The distance between the bottom of the housing to the top of the actuator when the actuator is fully pressed. 2. Operating force: The force required to press the actuator from its FP to OP.
Total travel position (TTP):
Engineering Data
Forward Current vs. Collector Dissipation Temperature Rating
Collector dissipation PC (mW) Forward current IF (mA)
IF PC
Forward Current vs. Forward Voltage Characteristics (Typical)
Forward current IF (mA)
Light Current vs. Forward Current Characteristics (Typical)
Ta = 25C VCE = 10 V
Ta = -30C Ta = 25C Ta = 70C
Light current IL (mA)
Ambient temperature Ta (C)
Forward voltage VF (V)
Forward current IF (mA)
Light Current vs. Collector-Emitter Voltage Characteristics (Typical)
Ta = 25C
Relative Light Current vs. Ambient Temperature Characteristics (Typical)
Relative light current IL (%)
IF = 20 mA VCE = 5 V
Dark Current vs. Ambient Temperature Characteristics (Typical)
VCE = 10 V 0 lx
Light current IL (mA)
IF = 50 mA IF = 40 mA IF = 30 mA IF = 20 mA IF = 10 mA
Collector-Emitter voltage VCE (V)
Ambient temperature Ta (C)
Dark current ID (nA)
Ambient temperature Ta (C)
Sensing Position Characteristics (Typical)
Relative light current IL (%)
IF = 20 mA VCE = 5 V Ta = 25C d (FP point: 0 mm)
Distance d (mm)
EE-SA113 Photomicrosensor (Actuator)
141

▲Up To Search▲

Price & Availability of EE-SA113

	To Download EE-SA113 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .